Digiop BLK-IPS102M Manuel d'utilisateur télécharger pdf (Page 6)

www.digiop.com

SECTION 2: INSTALLATION AND SETUP

SECTION 2

Installation and Setup

2.1 What’s in the box

Your camera includes the following:

• BLK-IPS102M camera

• Cap for protecting the sensor

• DC power adapter with power plugs for dierent powering sources

• DC jack adapter cable

• Adapter for mounting the camera

• 9-pin terminal block

• Hex wrench

• Quick installation guide

• CD mini disk with application software, software manual, and camera manual (this document)

2.2 Tools you need

To install the camera, you will need:

• Phillips #1 or #0 screwdriver

• Mounting bracket

• Compatible lens

• PC with Microsoft

Windows

XP SP3 or newer

NOTE

DIGIOP recommends that a manual iris megapixel lens is used with this camera to support its full resolution.

2.3 Mount the camera

1. Determine where the camera will be mounted and record the Media Access Control (MAC) address of the camera. The MAC

address can be found on the label on the bottom of the camera. Record the information in the following table.

Location:

MAC address:

1 2 3 4 5 6 7 8 9 10 11 ... 32 33

Pas de commentaire

Digiop BLK-IPS102M Manuel d'utilisateur Page 6